SEC Shaft Thrust Load Meter

Combine Type

 

The shaft horsepower meter and the thrust load meter are calculated with one detector ring.

The span of the detector ring span is 240mm, and both a torsion sensor and a thrust sensor are installed in the ring. A cover is attached to the outer periphery of the detector ring, and a transmission antenna is installed on the cover. The shaft rotation speed is calculated every 5 seconds from the 60 holes opened in the antenna ring on the outer periphery of the detector ring and the number of pulses generated by the infrared beam and                           photo sensor attached to the receiving antenna.

<System composition of Combine type>