Engine Combustion Pressure Monitor
Local Unit SE409
All actual measurements of engine combustion pressure are managed and performed by the local unit SE409.
The unit is located in the engine room and the pressure sensor is connected to the unit directly.
|【Built-in modules and functions】
|Excite the each sensor's vibration strip
|Scan sensor signal at every crank angle of 0.25/0.5 degree
|Collect and send all pressure data to the main monitor
Data Processing Display Unit SE203C/S
Installed in the control room and connected to the local unit via RS422. Integrated with shaft horsepower meter, thrust load meter and other operational data, can be displayed in a batch.